Uncategorized
Showing all 41 results
-
Complete Norton lightweight piston set (2).
$439.00 Select options -
Two Norton Ultra Hi compression domed pistons for racing fuel only
$539.00 Select options -
Drill two pistons and taper bore two pins for ultralight 20 gram savings and increased skirt lubrication, you must add this option to a piston/pin order.
$149.00 Add to cart -
Graphite piston skirt coating for two pistons. More durable than Molly or other coatings. Recommended for all pistons for tighter installation clearance, reduced friction and longer life. Measure clearance at the bare dot.
$119.00 Add to cart -
Two 6.4″ long Carrillo Norton rods for standard 89mm stroke or two 6.57″ long rods for 80.4mm short strokes
$649.00 Select options -
Two Ultralightweight 6.4″ long Carrillo rods for JS pistons only in 750cc solid frames, Atlas and 500 to 650cc Dominators. Use with ultralight pistons and taper bored pins (contact us for Domni pistons)
$695.00 Add to cart -
Two regular style piston ring replacement sets for JS lightweight pistons only
$49.00 Select options -
Totalseal type gapless ring upgrade. You must add this option to your order of regular rings or pistons. Expect improved compression and sealing
$49.00 Add to cart -
Two high strength .708″ DLC pins (diamond like coating)
$135.00 Select options -
Wrist pin clip set for JS lightweight pistons
$6.00 Add to cart -
Complete cam kit with lifters, blocks and pushrods for Commando, Atlas/Domni
$995.00 Select options -
Radius cam for use with JS lightweight radiused lifters and blocks
$449.00 Select options -
JS radiused cam drop in kit. We regrind your original lifters and you reuse your original pushrods.
$649.00 Select options -
Bronze lifter blocks (2) for lightweight radiused lifters and JS radiused cams, (lifters not included). Oil holes drain directly onto cam lobes for increased life
$149.00 Add to cart -
Norton pushrod set to be used with JS lightweight radiused lifters and radiused cam only
$125.00 Select options -
High performance Black Diamond valve & Beehive spring kit for stock street or racing
$299.00 Select options -
Beehive valve spring set without valves (fits JS valves only)
$175.00 Select options -
Four guide spacers for 850 and Full Auto heads wire clip guides with JSM spring bottom washers
$39.00 Add to cart -
Black diamond stock size valve set for JS Beehive valve springs only
$130.00 Add to cart -
Big valve set for JS Beehive valve springs only (smaller Domni sets on special order)
$245.00 Select options -
Special short lash cap set to fit valve tips for JS Beehive springs. For those who modify their own valves without stellite tips. Also fits stock valves (not necessary for stellite tipped JS valves).
$12.00 Add to cart -
Custom Thickness Copper Head Gasket for Norton twins (add pliobond sealant)
$39.00 Select options -
Custom Copper Base gasket for Norton Twins
$30.00 Select options -
High compression .003″ thin head gasket ring set
$30.00 Select options -
High temp sealant for copper gaskets. Apply to each surface. The best head gasket sealer you can get
$8.00 Add to cart -
Slippery Turcite fork bushings for Norton forks. Reduces friction, stiction and fork tube wear for a smoother ride. Superior and longer lasting than teflon. Slit for improved fit. Sized to fit 1.356 to 1.359″ diameter tubes (see alum sleeves).
$159.00 Add to cart -
Aluminum fork sleeves and oil hole plugs provide hydraulic bump stop to eliminate top out and bottoming clunk (does not restrict fork travel). Slit for hand press fit so they stay in place.
$49.00 Add to cart -
One piece aluminum rocker spindle covers with SS allen screws & alum washers (see silicone gaskets)
$45.00 Add to cart -
One way reed valve breather
$199.00 Select options -
Fiberglass reinforced silicone gaskets
Select Options -
Norton race manual. From crank strengthening & balancing to porting, megaphones and much more, a must for every Norton racer and engine builder.
$25.00 Add to cart -
Norton Monoshock Racing Chassis plans CD of one of the fastest Norton roadracers ever built and the last Norton to get on the AMA podium (3rd place BOTT at Willow springs in 1990). Autocad 2000 or later is required to view the drawings
$10.00 Add to cart -
Narley port CD with over 50 photos and drawings of high flow ports. “Full Auto”, “Axtell”, “Harley XR 750” and stock Norton ports included. A Street/marketable version is also included with suggestions for re-angled valves or stock size valves. AutoCad 2000 or later required to view the drawings.
$10.00 Add to cart -
High strength ARP stainless reduced shank studs and bolts for head and cylinders.
Select Options -
Joe Hunt magneto for Atlas and Dominators with high powered rare earth magnets for easy one kick starting. Hotter spark than electronic ignition systems. Mounts behind cylinders. Unique JS upgrades include a screw driver slot in the armature for easier timing adjustment, sealed adapter plate and reusable fiberglass reinforced gasket
$719.00 Add to cart -
Joe Hunt magneto timing cover mount for Commandos with high powered rare earth magnets for easy one kick starting. Hotter spark than electronic ignition systems. Adapter plate. JS upgrades include hardened hex drive shaft. See optional retard lever.
$799.00 Add to cart -
Add this option when ordering a JS Commando timing cover mag and a special retard lever will be installed and bench tested. Flipping lever retards it 20 deg for starting.
$199.00 Add to cart -
Keihin 33mm CRS smoothbore carb kit with throttle & cable, billet manifolds with balance tube, boots & clamps, velocity stacks.
$995.00 Select options -
Plumbing kit for smoothbore carbs including high quality heavy wall polyurathane fuel line, 90 deg filter and T fitting, petcocks not included.
$24.00 Add to cart -
K&N aircleaner for Keihin smoothbore carbs
$75.00 Add to cart -
You will see shipping costs before committing to buy. Contact us for expedited.
back to top
Showing all 41 results
